LORO-X balcony drainage series I with dome

Series I includes direct drains "with dome" as a vertical and horizontal design.

 

For the renovation of balconies (with core drilling) we recommend the Series IK with clamping collar.

Dome

The bell-like design of the underside of Series I and IK for setting in concrete is called the bell. The bell consists of an inner tube (carrying the media) and an outer tube that forms an annular gap. An annular gap is created between the two, into which the socket of the downpipe can be pushed from below. A separate bell jar can therefore be dispensed with.

Application examples Series I

Balconies made of precast concrete parts made of waterproof concrete, without additional covering. You will find further application examples with a detailed description in our brochure LORO-X balcony drainage systems.

 

LORO-X Balcony direct drains with dome, Series I, horizontal socket
Minimal slab thicknessDN 50
120 mm16362.050X

Siebe

Strainer, made of stainless steel
DN 50DN 70DN 100
with pipe opening16193.050X16193.070X16193.100X
for upper balconies16191.050X16191.070X16191.100X
LORO-X holding fixture for strainer with strainer holes
DN 50DN 70DN 100
16195.050X16195.070X16195.100X
LORO-X Strainer support, for balcony drains series I, IK, G, GF and GS
The LORO-X sieve holder for balcony drains of the series I, IK, G, GF and GS iis a high-quality alternative to the standard plastic sieve holders. End sieves for individual drains as well as ring sieves for direct drains can be used in the sieve holder.
The surrounding collar as a decorative sheet enhances the balcony drainage on the second, visible, drainage level .
DN 70DN 100
made of stainless steel 16190.070X16190.100X
LORO-Balcony drain collar made of stainless steel, matertial-no 1.4301, material thickness 1 mm
DN 050DN 070DN 100
compatible to pipes16800.050X16800.070X16802.100X
compatible to sockets16801.050X16801.070X16803.100X