LORO-X Series 43 model with basin

The models with basin are particularly notable for their increased discharge rate compared to the models without roof penetration.

Via the circumference of the overflow edge of the basin, significantly more water can be collected from the sealing level. In the basin, a higher water level is reached relative to the pipe so that the discharge through the horizontal pipe is higher.

In the case of the emergency drainage, the special strainer basket is closed in the lower area and thus also functions as congestion element. Due to its very large overflow edge, a high discharge rate is already possible at just 15 millimeters above the overflow edge.

The model with a basin thus offers a balanced relationship between increased discharge rate and energy-saving potential thanks to a low penetration depth into the roof.

 

Application example Series 43 with basin

LORO-X Parapet-direct drain - with basin -
made of galvanized steel DN 70 and DN 100

DN 70DN 100
for bituminous roofing sheets01330.070X01330.100X
LORO-X Parapet-direct drains - emergency drain with basin -, made of galvanized steel, DN 100

DN 70DN 100
weir heights 40 mm
for bituminous roofing sheets
01334.100X
LORO-X Parapet-direct drains - emergency drain with basin -, made of galvanized steel, DN 100

DN 70DN 100
weir heights 60 mm
for bituminous roofing sheets
01336.100X
LORO-X drain collector box for LORO-RAINSTAR and LORO-X parapet-direct drains

DN 70DN 100
with round opening DN 70 and DN 100, made of galvanized steel
04379.070X04379.100X
LORO-X sliding flanges for LORO-RAINSTAR and LORO-X parapet-direct drains

DN 70DN 100
for bituminous roofing sheets13235.070X13235.100X
for plastic roofing sheets13236.070X13236.100X